Key details
Duration
Locations
Entry requirements
View full entry requirementsCredit points required
40Course code
Overview
The Undergraduate Certificate Introduction to Mathematics and Physics is a course that offers you the opportunity to upskill, reskill and retrain. The course takes 2 semesters and can be completed within half a year by enrolling in an intensive semester and a regular semester or within one year by enrolling in two regular semesters.
Available online or on campus, this course will equip you with core skills in mathematics and physics. It is also a direct pathway into higher education courses in computer science, education, engineering and science, should you wish to continue studying.
On completing the Undergraduate Certificate in Mathematics and Physics, you will be eligible to use the credits you've gained towards further study of a:
- Bachelor of Computer Science
- Bachelor of Education Primary
- Bachelor of Education Secondary
- Diploma of Engineering
- Associate Degree of Engineering
- Bachelor of Engineering Science
- Bachelor of Engineering Honours
- Diploma of Science
- Bachelor of Science
You may also use the Undergraduate Certificate as a pathway for entry into a variety of other higher education courses.
Advanced standing may be granted for some or all of the subjects you successfully complete. If further study is your intention, be sure to check the requirements of your preferred undergraduate degree to determine how many credits you can transfer.
Career opportunities
The course provides you with the opportunity to upskill, retrain and reskill in mathematics and physics whilst providing pathways to pursue further study.
Fees
Commonwealth supported places
Commonwealth Supported places are available in this course to students who meet one of the following residency requirements:
(a) be an Australian citizen, who will complete some of your course of study while resident in Australia; or
(b) a New Zealand citizen; or an Australian permanent visa holder; or an eligible former permanent humanitarian visa holder; who studies the entire course while living in Australia.
Further information about fees and charges can be found at Fees and Payments.
International tuition fees

Why study engineering at CDU?
Our internationally-accredited engineering degree is for problem solvers like you. Think creatively to find solutions to real-world challenges, from uniquely Top End issues like cyclones to systems and designs with wider impact like renewable energy, transport, building construction, electronics, and more.
- #3 in Australia for engineering and technology employment outcomes (GUG 2024)
- #4 in Australia for engineering and technology starting salary (GUG 2024)
- Choose to study online, on campus, part-time or full-time as it suits you
- Take part in projects and graduate with real work experience

Why study an undergraduate course at CDU?
Study an undergraduate course at Charles Darwin University to turn your passion into a profession. Choose from hundreds of certificates, diplomas and degrees and enjoy a flexible, supportive learning environment. Whatever you're interested in, there's a place for you at CDU.
- Top 100 university globally for quality education (THE Impact Rankings 2021)
- Five-star Australian university for graduate employment outcomes (GUG 2024)

Why study engineering at CDU?
Our internationally-accredited engineering degree is for problem solvers like you. Think creatively to find solutions to real-world challenges, from uniquely Top End issues like cyclones to systems and designs with wider impact like renewable energy, transport, building construction, electronics, and more.
- #3 in Australia for engineering and technology employment outcomes (GUG 2024)
- #4 in Australia for engineering and technology starting salary (GUG 2024)
- Choose to study online, on campus, part-time or full-time as it suits you
- Take part in projects and graduate with real work experience

Why study an undergraduate course at CDU?
Study an undergraduate course at Charles Darwin University to turn your passion into a profession. Choose from hundreds of certificates, diplomas and degrees and enjoy a flexible, supportive learning environment. Whatever you're interested in, there's a place for you at CDU.
- Top 100 university globally for quality education (THE Impact Rankings 2021)
- Five-star Australian university for graduate employment outcomes (GUG 2024)
What will I study?
This 40-credit point course consists of four (4) core units. This course consists of a combination of introductory and first-year degree subjects, designed to help you develop core knowledge in mathematics and physics, as well as the necessary skills for successful university studies.
Course structure
A candidate must successfully complete units totalling 40 credit points (cp) as detailed below. All units are valued at 10 credit points unless indicated.
Unit type | Credit Points | Specific requirements |
Core (4 units) | 40cp | Compulsory Core units totalling 40 credit points as detailed below. SMA101 Mathematics 1A ** SMA102 is recommended for students who would like to pursue a postgraduate engineering qualification after completion of this higher education certificate |
40cp | Total Credit Points |
Study plan
Students Commencing in Semester 1 (March)
The Recommended Study Plan provided below is suitable for a student commencing in semester 1 and enrolling in a standard part time load.
Part-time Study Plan (1 year)
Legend: | CO = Core Unit |
Semester 1 | Semester 2 | ||
Year 1 | |||
SMA104 Concepts of Mathematics 1A OR SMA101 Mathematics 1A | CO | SMA101 Mathematics 1A OR SMA102 Mathematics 1B | CO |
CUC106 Design and Innovation: Communicating Technology | CO | SPH141 Concepts of Physics | CO |
Students Commencing in Semester 2 (July)
The Recommended Study Plan provided below is suitable for a student commencing in semester 2 and enrolling in a standard part time load.
Part-time Study Plan (1 year)
Legend: | CO = Core Unit |
Semester 1 | Semester 2 | ||
Calendar Year 1 | |||
SMA104 Concepts of Mathematics 1A OR SMA101 Mathematics 1A | CO | ||
CUC106 Design and Innovation: Communicating Technology | CO | ||
Calendar Year 2 | |||
SMA101 Mathematics 1A OR SMA102 Mathematics 1B | CO | ||
SPH141 Concepts of Physics | CO |
Entry requirements
Admission criteria
Admission requirements are met by one of the following:
- Successful completion of the Northern Territory Certificate of Education and Training (or equivalent).
- Successful completion of a national qualification at Certificate III level or higher.
- Successful completion of at least 0.5 year of full-time study (or equivalent) of a higher education degree/diploma.
- Overseas secondary or tertiary qualifications considered equivalent to the above Australian qualifications.
- Attainment of a STAT Multiple Choice score of 125 or higher.
- Successful completion of a recognised tertiary preparation course.
- Submission of an acceptable personal competencies statement and/or employment experience.
Essential requirements
English language requirements
DOMESTIC STUDENTS
To gain entry into Charles Darwin University, all Higher Education applicants must satisfy the University's English Language Proficiency Requirements for their chosen course of study. From 2025 all applicants will be required to supply evidence of this at the time of application.
The minimum English language requirement for this course can be met by evidencing of one of the following:
Year 12 | Successful completion of Year 12 within Australia, or an equivalent qualification from an approved country where English is the official language (refer to our approved standard and extended lists included below). |
0.5 FTE Higher Education Study | Successful completion of at least 0.5FTE of higher education study from Australia or an approved country where English is the official language (refer to our approved standard and extended lists included below). If studies were completed from a country on the extended list, they must have been completed within the past five (5) years. |
CDU Enabling Course | Successful completion of a Charles Darwin University enabling program of at least 0.5FTE (40 credit points). |
TAFE Qualification | Successful completion of a recognised TAFE qualification at a Certificate III level or higher from Australia. |
AHPRA Registration | Current AHPRA registration as a Division 1 or Division 2 nurse. Registration must be current at the time of course commencement. |
English Test^ | Completion of an approved English test within two years of commencement, meeting the minimum scores outlined in the table below. |
^ Minimum Requirements for English Tests:
Postgraduate requirements | Undergraduate requirements | |
CDU ELICOS - English for Academic Purposes | Successful completion of EAP004 | Successful completion of EAP003 |
International English Language Testing System (IELTS) Academic test | Overall minimum: 6.5 No band below: 6.0 | Overall minimum: 6.0 No band below 6.0 |
Cambridge English: Advanced (CAE) | Overall minimum: 176 No skill below: 169 | Overall minimum: 169 No skill below 169 |
Pearson Tests of English (PTE) Academic | Overall minimum: 58 No score below 50 | Overall minimum: 50 No score below: 50 |
Test of English as a Foreign language | Overall minimum: 79 Minimum writing score: 21 | Overall minimum: 60 Minimum writing score: 21 |
IELTS One Skill Retake is accepted, allowing candidates to retake a single skill within 60 days of sitting their initial test. One Skill Retake results are valid for two years from the date of the first test (not from the date of the Retake test) to the date of commencement at CDU.
CDU accepts combined results from two test sittings of IELTS Academic, PTE Academic, or TOEFL, taken within a six-month period, if:
- Both tests were under the same testing system; and
- The overall score in both tests meets the overall minimum; and
- The applicant achieved the section minimum for each section in at least one test.
Recognised English-speaking countries:
Standard List | Antigua and Barbuda, Australia, Barbados, British Virgin Islands, Canada, Ireland, New Zealand, Singapore, South Africa, United Kingdom, United States of America. |
Extended List | Bermuda, Botswana, Cayman Islands, Ethiopia, Fiji, Kenya, Malawi, Malta, Mauritius, Seychelles, St Vincent and the Grenadines, Tanzania, Trinidad and Tobago, Vanuatu, Zimbabwe. |
For further details on the English requirements for CDU courses, please refer to the CDU English Language Proficiency Policy.
The people-first approach to flexibility and supportive learning environment at CDU meant I could find a balance with study, work and family life.
Nikki
CDU student

I always encourage the young generation towards STEM fields, especially females. The other good thing about engineering or other STEM fields is that they are interconnected, meaning there are multiple career opportunities.
Shehani
CDU student

The people-first approach to flexibility and supportive learning environment at CDU meant I could find a balance with study, work and family life.
Nikki
CDU student

I always encourage the young generation towards STEM fields, especially females. The other good thing about engineering or other STEM fields is that they are interconnected, meaning there are multiple career opportunities.
Shehani
CDU student

Course details
Accreditation
This course is accredited by the University in accordance with the Higher Education Standards.
Additional information
Contact details
For further information about the course, enrolment procedures, closing dates and other administrative issues please contact Student Central on:
You make CDU
Together we are a positive force for change in our communities and the world.
Learn about engineering at CDU
John is from China studying a Bachelor of Engineering at CDU. Hear more about his experience of studying, living, working and playing in Darwin, Northern Territory, Australia.
You make CDU
Together we are a positive force for change in our communities and the world.
Learn about engineering at CDU
John is from China studying a Bachelor of Engineering at CDU. Hear more about his experience of studying, living, working and playing in Darwin, Northern Territory, Australia.
How to apply
There are many ways to apply to CDU. The method you use depends on your course type, where you live and whether you are a new or returning student to CDU.
Remember to apply early for your best chance at securing an offer to study with us.
SATAC
SATAC is the application channel for residents of NT, ACT, SA, WA, QLD, VIC, NSW or TAS.
MyNextCourse
Direct applications are available to students who have completed a CDU or BIITE course at a Certificate III level or higher. Most CDU and BIITE enabling programs are also accepted through this process.
If you do not meet any of the criteria above please visit Pathways to study to view the options available to you.
Share this course